Kids Toy Tools

Originally from https://makerworld.com/en/models/687199?from=search#profileId-615895 there were some issues with their uploaded model. I ran some trial and erroring and saved the adjustments and model changes / scaling and uploaded it here to make it a little easier to just pick up and print.

The adjustments in total are:

- Increased the size of the screwdriver handle to 101.5%
- Decreased the size of the hammer handle to 95%
- Flipped one side of the saw handle
- Decreased the size of the saw edge by 2%

If you are not interested with the two tone on the saw / saw blade then put them all onto the same plate when printing the tool heads. Otherwise my advice would be to print the saw blade a darker shade of grey, and the saw body the lighter shade, opposite to what I have shown in my image.

Please use glue if you are planning young children to be playing / around these items. The original designer included some small squares that you will see on the build plates for the handles. My recommendation is to only use these for alignment when glueing the two halves together. The better option is to not include them at all to mitigate some of the choking hazard risks involved.

Again, please glue these handles together!