Decorative Baskets
Print Profile(1)
Bill of Materials
Description
This basket's woven appearance was designed to replicate the look of an actual basket. This model is part of my Woven Series.
Two versions are available - One with handles and one without handles. If you are using the version with handles, 4 M3x16 bolts and 4 M3 lock nuts are required.
Similar to Longaberger's “Tie-On” for their handmade baskets, I have created charms to hang on your basket if desired. This requires some thin ribbon or string to attach. You can find them here.
Print Settings
For optimal results, 0.2mm layer height should be used. You can also vary infill percentages as needed to reduce print time.
Assembly Instructions
The following filaments were used in the picture above:
Baskets
- Bambu Lab Matte Dark Brown PLA
- Bambu Lab Basic Brown PLA
Charms
- Bambu Lab Matte Ivory White PLA
- Bambu Lab Silk Copper PLA
- Bambu Lab Silk Gold PLA
- Bambu Lab Basic Bambu Green PLA
- Bambu Lab Matte Scarlet Red PLA
Membership
Are you looking for a Commercial License for all JamesThePrinter models?
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (148)