Search models, users, collections, and posts
Multi device charging station
IP Report
Print Profile(2)
0.2mm layer, 2 walls, 15% infill - with smaller dividers
11.2 h
5 plates
Magsafe modular attachment
1.2 h
1 plate
Open in Bambu Studio
Boost
586
2299
125
152
1.9 k
1.1 k
Released
Description
I designed this charging station using this charging bloc : https://www.amazon.ca/dp/B0CGC76Y6Y?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1. Print the base and the cover and as many vertical separators as you need. The separators keep the base and the cover together. Printing is easy, no support required. I used PLA printed at .20 mm and it turned out very well. Update 2024/12/27 : Following a comment from Guserton, I have included a “Base Flat” STL. This will allow dimensionally different chargers to fit inside the base as long as they are not too thick.
Comment & Rating (125)