Card Fidget Toy (Print in place) - Free 3D Print Model

Search models, users, collections, and posts

D.Sign

Toys & Games>Other Toys & Games

IP Report

GIF

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

NO AMS 0.2mm layer, 2 walls, 5% infill

Designer

45 min

1 plate

4.8(33)

Select Plate for color or no color 0.2mm layer, 5% infill

Designer

12.1 h

3 plates

4.9(8)

Cards with Separated Middle Part for Meliodas

Designer

3.3 h

2 plates

5.0(1)

Euchre Version for Llama11amaduck

Designer

6 h

1 plate

Open in Bambu Studio

Boost

300

556

101

614

423

Released

Description

Royal Flush Cards Fidget Toy - Prints in place, no gluing, attaching, or supports required!

Make sure to print on its side as show in the pictures. Once printed, pinch the cards together at the pin to release it and then spread the cards open. If you have any questions, I would be happy to answer.

Non AMS version:

Less than 1 hour print, low filament consumption.

Boost Me (for free)

Comment & Rating (101)

@YannayKanfer

Print Profile

NO AMS 0.2mm layer, 2 walls, 5% infill

It is really good 👍

The profile uploader has replied

@D.Sign

Thank you for the rating and print! Glad it worked for you :)

@Llama11amaduck

Boosted

Hello! I play euchre and am wondering if it's possible to have a version that's Jack Jack Ace King Queen?

The designer has replied

@D.Sign

Yes of course! Front card is Jack and the back card is queen? Do you want it as a solid color (non ams) or with color (ams)? :)

@Llama11amaduck

Boosted

Replying to @D.Sign :

I have AMS! If possible, it would be (from left to right when extended) Jack of spades, Jack of clubs, Ace of spades, King of spades, Queen of spades. happy to toss something your way on Venmo for the trouble!

@D.Sign

Replying to @Llama11amaduck :

I think i have something ready for you but it hasn't been tested. Would you like me to test it first or just publish it? The print would take about 6 hours. And any support is appreciated but not necessary! I've been trying to work my way towards an A1 :D

@SnoobKid

Print Profile

Select Plate for color or no color 0.2mm layer, 5% infill

rly good and works as expected

@user_2969899196

how did you get all the cards painted so they print color on all the cards?

@SnoobKid

Replying to @user_2969899196 :

oh, good question! I have a bambu x1c with an AMS, which is an attachment for printing in multiple colors 😁

@SnoobKid

Replying to @user_2969899196 :

if you are asking about how the cards are painted using the online tool, the creator has made a preset that is already colored in for you 😀

@tj66stang

Great print, fast!

The designer has replied

@D.Sign

Thank you!

@burgerCheese

Boosted

Print Profile

NO AMS 0.2mm layer, 2 walls, 5% infill

perfect, very satisfying to play with

The profile uploader has replied

@D.Sign

Thanks glad it worked out!

@user_3045963732

this is awesome

@user_1287709227

Print Profile

NO AMS 0.2mm layer, 2 walls, 5% infill

Won’t close as a single stack. Still a good idea

@MJB_1106900451

Print Profile

NO AMS 0.2mm layer, 2 walls, 5% infill

Printed Great!

(Edited)

@sev1207

Boosted

Hello I printed one in single color with ABS and now I want in the colors PLA (black and red) but I don't have enough black to print by layer changing the filament because the flushed material it's a lot… It is possible to print the deferents colors parts in different objects or just the heart in the middle.

The designer has replied

@D.Sign

I can remove the middle heart and just add a small heart piece that you can print separately and glue on. What do you think? :)

@sev1207

Boosted

Replying to @D.Sign :

Yes, thanks that would be great if it's not too much trouble

@D.Sign

Replying to @sev1207 :

I have been really busy with work but i should be able to have the profile done sometime this weekend. I will reach out to you when its ready :)

@burgerCheese

Boosted

mine didn't work I'lL 3d print later to try again but I'd enjoy if there where a version of this with multicolor on only the middle of the card and not the sides because otherwise it waste so mutch filiment and time switching colors

The designer has replied

@D.Sign

@burgerCheese Thank you for trying to print it. If you send me a picture of your attempt I can do my best to assist you. Have you checked moisture levels, bed level, and print it on the side like shown in the picture? The print has some tight tolerances. And I agree, there is so much filament waste with the color changes :( I tried your suggestion and there seems to still be a bunch of poop but I will add it into the profile so you have the option :)

@burgerCheese

Boosted

I'm think it's because I added auto support and it made them in-between the cards IL just print it normally later and see how it goes

@D.Sign

Replying to @burgerCheese :

Sorry for the confusion, You are correct, no supports are needed. I will add this to the description. Thanks!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.