o arquivo é muito bom, mais eu imprimi com um bico 0.4 e deixei com medida para Hot Wheels dai ficou muito pequeno seria bom o bico 0.2 mais deu pra quebrar o galho, depois que eu comprar outro bico para minha impressora eu imprimo de novo

The file is very good, but I printed it with a 0.4 nozzle and sized it for Hot Wheels, so it turned out too small A 0.2 nozzle would be good, but it got the job done After I buy another nozzle for my printer I'll print it again

Andre182

0.08mm 层高, 2 层墙, 80% 填充

0.08mm layer, 2 walls, 80% infill

是的，这个是为1:24的模型设计的，原比例可以使用0.4喷嘴，我图片里的就是使用了0.4喷嘴

Yes, this is designed for a 1:24 scale model The original scale can be printed with a 0.4 nozzle, and the one in my pictures was also printed with a 0.4 nozzle

Sun Zhengping

底盘是漂移蚊车底盘，我改了外转子无刷电调和电机

The chassis is a drift mosquito car chassis, modified with an external rotor brushless ESC and motor

user_3391564907

what is the 80 series Land Cruiser in the back? rc? 

user_64227860

die Zwischenstreben sind leider herausgefallen

Unfortunately, the intermediate struts have fallen out

Christian2405

可能和耗材有关系，我打印是正常的

It might be related to the filament, my printing is normal

LittleGuyMiniModels

Copenhagen_Don

user_835367459

Cool duck

PawH

cover

微信图片_20241213234853.jpg

微信图片_20241213234859.jpg

微信图片_20241213234905.jpg

微信图片_20241213234823.jpg

plate_1.png

2024-12-13_9a88cc7a1cac1.jpg

1/24 JDM漂移蚊车 遥控模型 尾翼 扰流板 预留 2mm*1mm 磁铁位置

1/24 JDM Drift Mosquito Car Remote Control Model SpoilerReserved 2mm*1mm magnet position

Print Profile(1)

Description

Comment & Rating (14)

License

Related Models