3/8'' M12 Impact Packout Insert

My Version of the 3/8 impact packout insert. will fit at least a 4ah battery on the impact, and the bottom storage bin holds small batteries and bolts. It also goes all the way to the top, so items wont fall out.

all the inserts have tabs that go up to the Lid to ensure it stays down. The tab on the middle tray also acts as a handle to remove the tray.

Socket depths ensures that everything stays in its place. Under the shallow sockets is place to store extensions, socket adapters and other bits.

extension slots are designed to be a little snug at the bell side.

** 07-10-25

Updated 3MF file has been uploaded to include better fitting center section. as well as uploading just the stl version.

To install: press lower section (the smallest section that goes toward the handle) in first. It will be a tight fit, but it will press down. Then install the top section followed buy the middle removable insert. 

sockets are sized to this set:

https://a.co/d/hOZUrgq

Sockets are sized as follows:

SAE:

¼-7/16": 0.73"

½, 9/16'': 0.82''

5/8", 11/16: 0.97''

¾'': 1.14"

METRIC:

6-12mm: 0.725"

13,14mm:.081"

15mm:0.89''

16,17mm:0.97''

18mm:1.05''

19mm:1.14"

Depths are designed for the following, and have a little play:

Shallow: 1.15''

Deep: 2.45''

Would love a boost if this works for you!