Radio Control Racing Boat - Aerotrooper

Please read before printing:

Want a smaller one? Click here to print the little brother.

Introducing the Radio Control Racing Boat!

Needed parts:

Transmitter: https://amzn.to/3ZEqISv

Servo: https://amzn.to/3ZCsmnL 

High amperage ON/OFF switch: https://amzn.to/3VEGeNc

30A ESC: https://amzn.to/3ZT7fyO

2200kv Motor: https://amzn.to/4geUmF5

3s 2200mAh Battery: https://amzn.to/3ZYbvMD

Propeller 5030~5045: https://amzn.to/49GJUDT / https://amzn.to/3OWmzo7

Printing:

Boat dimensions: 560x240x195mm

Printing hours: 23,5h

PLA is not recommended for the boat parts (it works, but ABS, ASA, or PETG would be better).

You can use the included 3MF files with pre-plated parts, or arrange the individual parts yourself.

Recommended print settings (100% scale, 0.4mm nozzle):

Use PETG or similar material with 15% infill.

Print the blue parts in soft material like TPU.

Apply normal (manual) support with snug style to Casco Trasero.STEP

Apply tree (auto) supports to Gavia.STEP:

Assembly Manual: ‘Think twice print once’:

If you want to guarantee the watertightness of the hull, I recommend applying one or two coats of clear varnish.

Thanks for downloading!
If you enjoyed this model, don't forget to check out my other creations and follow my profile for future releases.
 

Happy printing! 😊

⚠️ Personal use only.
Selling prints requires a Commercial License.