Samus Aran - Metroid - Dimensional Mosaic

Based on the incredible work of w3r3wolv3s, I've created a Samus Aran dimensional mosaic from Metroid. Since this one uses quite few more colors than the others, I made the layers 16% thinner so that the print doesn't get too thick, but still has the 3-D effect common in all my dimensional mosaics. Just like in my other Super Mario mosaics, Samus breaks out of the circle that I've previously limited these dimensional mosaics to.

This is sized for the A1 Mini. If you have a larger printer and want to scale it up, only scale the x and y axis as it assigns color based on layer height. Do not scale the Z axis or you will need to reassign the color swaps.

This is a big print that uses 9 different colors, meaning you will have to do quite a few color swaps. Start off with Light Gray, White, Red, and Yellow. I recommend first swapping White for Pink, then Pink (originally White's position) for Orange, Red for Cyan (or Blue if you don't have Cyan), then Yellow for Green, and finally Orange (originally White's position) for Black. The White for Pink swap is pretty easy, you can make the swap at an hour and 45 minutes, and have over an hour to complete the swap. However Pink for Orange is the quick one, you only have 13 minutes to do it, so I've thrown a pause in during the final layer of Red before you start Orange. So make the swap during the pause, then hang aroun for 3 minutes so Red can finish and swap in Cyan. An hour later it will be time to swap Yellow for Green and you'll have over 40 minutes to complete it. 20 minutes you can make the final swap of Orange for Black and this one gives you well over an hour to complete. So only that one pause between Pink and Orange is built in, but feel free to add more if you like.

Please note, as is the case with all my mosaics, the colors will not appear until you slice the plate, but I promise you they are there.

This is fan art and is not licensed by Nintendo, please do not sell copies of it.