Super Mario Dimensional Mosaic

It's a me, Mario!

Based on the incredible work of w3r3wolv3s, I've created a Mario dimensional mosaic. This is probably my favorite one yet featuring tons of depth and lots of colors. I also allow Mario to break out of the circle that I've previously limited these dimensional mosaics to.

This is sized for the A1 Mini. If you have a larger printer and want to scale it up, only scale the x and y axis as it assigns color based on layer height. Do not scale the Z axis or you will need to reassign the color swaps.

This is a big print that uses 10 different colors, meaning you will have to do quite a few color swaps. Start off with Light Gray, White, Peach (skin tone, not the Princess), and Red. I recommend first swapping White for Pink/Magenta, then Peach for Brown, Light Gray for Blue, and then Pink (originally White's position) for Yellow, Red for Cyan, and finally Brown (originally Peach's position) for Black. Because of how many swaps are required, I didn't bother with including pauses. The first swap can be made after 1:50 and needs to be done before 3:23 into the print, so not too long to wait but plenty of time to perform the swap. The second swap can be done at 2:45 and before 4:06. After that the swaps come up pretty quickly, but you always have a decent amount of time to perform them. So maybe set an alarm on your phone for the first 2, and then hang around after that until you make the final swap.

Please note, as is the case with all my mosaics, the colors will not appear until you slice the plate, but I promise you they are there.

This is fan art and is not licensed by Nintendo, please do not sell copies of it.