林小怂

cover

Snipaste_2024-09-04_14-29-58.png

Snipaste_2025-01-11_22-50-12.png

Snipaste_2025-01-11_22-50-52.png

Snipaste_2024-09-04_15-05-20.png

Snipaste_2024-09-04_19-26-01.png

Snipaste_2024-10-02_18-53-13.png

plate_1.png

2024-12-13_c7667085251d1.png

0.24mm layer, 2 walls, 10% infill

&nbsp;更新了链接支架，可以使用支架链接屹立不倒，更新了15cm和20cm的长度，打印过程中可能会因材料收缩导致装配失败，我这里增加了装配间隙，可根据自己材料进行缩放微调，为了更好装配和节约材料，我这里将键盘支架厚度调整为15mm，这样会使打印速度加快，配合链接支架纵使独自放在桌上也不会倒下  &nbsp;Updated the link bracket, you can use the bracket link to stand tall, updated the length of 15cm and 20cm, the assembly may fail due to material shrinkage during the printing process, I have increased the assembly gap here, which can be scaled and fine-tuned according to your own material, in order to better assemble and save materials, I here adjust the thickness of the keyboard bracket to 15mm, which will speed up the printing speed, and the link bracket will not fall down even if it is placed on the table alone

&nbsp;The link bracket has been enhanced for superior stability, with 15cm and 20cm length options now available Material shrinkage during printing may hinder assembly; therefore, I've incorporated assembly clearance adjustments, allowing for scaling and fine-tuning based on your chosen filament To optimize assembly and material efficiency, the keyboard bracket thickness has been refined to 15mm, resulting in faster print times This, in conjunction with the improved link bracket, ensures steadfast stability even when positioned independently on a surface  &nbsp;Updated the link bracket, you can use the bracket link to stand tall, updated the length of 15cm and 20cm, the assembly may fail due to material shrinkage during the printing process, I have increased the assembly gap here, which can be scaled and fine-tuned according to your own material, in order to better assemble and save materials, I here adjust the thickness of the keyboard bracket to 15mm, which will speed up the printing speed, and the link bracket will not fall down even if it is placed on the table alone

s4rib

Capturedbd.JPG

i made this so i could print this to my a1 mini without using bambu studio, enjoy 🎭🎃🎊🎉

A1 mini profile

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

很稳定，可立电脑<boostme><boosttitle>Boost Me</boosttitle><boostcontent>你的支持就是我的动力 </boostcontent></boostme>

Very stable, free-standing computer<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Your support motivates me </boostcontent></boostme>

Print Profile(3)

Description

Comment & Rating (148)

License

Related Models

Keyboard Stand

Print Profile(3)

Description

Comment & Rating (148)

License

Related Models