Bulbasaur

cover

large_display_206e3449-0014-41ad-9e93-158796f8efd7.webp

large_display_2a24700d-2182-480f-bf65-dde71b8f5ae7.webp

S__67846191.jpg

S__67846189.jpg

plate_1.png

plate_2.png

plate_3.png

S__67829875.jpg

0.2mm layer, 2 walls, 15% infill

SkunkleButt

bulbasaur.jpg

Repaired non manifold edges with the base and simplified the model to help slicing times, i also removed the supports from the base as it prints fine without them so no risk breaking the leaves as well as adjusted the orientation to the bulb and vines so that they print with the support scarred portions to where they are less visible when it&#39;s done and increased the wall count to 4 for added structural integrity as that part holds the desired item.

0.2mm layer, 4 walls, 15% infill

Gonzalo

Foto.png

PXL_20250402_172813250.jpg

Este perfil mejora el acabado en la zona del bulbo y tentáculos, cortándolos de manera que se impriman mejor, luego solo hay que pegarlos.Se verá una pequeña línea, pero mejor que el acabado con soportes.&nbsp;El cuerpo de Bulbasaur también ha sido modificado para quitar unos soportes que no eran necesarios y solo añadía tiempo de impresión.

This profile enhances the finish in the bulb and tentacle areas, trimming them for improved printing; simply glue them afterward.A slight seam will be visible, but this is superior to the finish achieved with supports.&nbsp;Bulbasaur's body has also been modified to remove unnecessary supports that only increased printing time.

Better finish on Bulb, bulb and tentacles cut

dc152936-7427-4d53-b079-33fea30e9b36.jfif

c2da8a19-dd8a-4d31-856d-c26eba14634a.jfif

You can adjust the quality as you like. It is suitable for 9 small flowers and 9 large flowers.

0.16mm layer, 2 walls, 15% infill

plate_4.png

Seppy The First

IMG_7336.jpeg

IMG_7337.jpeg

Screenshot 2026-02-13 164848.png

This profile compiles multiple of the existing profiles for better ease of use. You can print the grass seperatly for a better finish and more customizable color experience while still having access to the 5 color Bulbasaur!&nbsp;This profile uses 0.4mm nozzle on 0.2mm layer height to get the perfect balance of smooth look and fine detail

Bulbasaur Separate Grass Full Model

11383acf-b004-4a4a-8209-8dd1f5abb905.jfif

95f9a43b-cfdc-4ef7-86a3-cb6258ede933.jfif

Printing individual flowers is great; it looks lovely.

Adjust the quality to your liking. You can even print at 0.08 inches and it looks great.

If it doesn&#39;t fit, lightly sand the edges. It fits perfectly. While it may protrude slightly from the base, it fits perfectly.

balbazar headphone base flowers0.12mm layer,2walls,35%infill

panda guy

Screenshot_7-3-2025_155120_www.bing.com.jpeg

colorized with green, brown, blue, dark blue, red, and white

PokeFind Originals

BulbaBase.jpg

Colored in the grass for those who prefer a more showpiece look. I did my best to catch every speck of out-of-place color to minimize filament swaps as much as possible. I think I got them all, but if you spot any stray color changes, feel free to fix them — might save you a swap or two. Printer: A1Basic PLA: Bambu Green, Bambu Mistletoe Flow Ratio Calibrated at Nozzle 221°C, Bed 51°C Cool Plate (CryoGrip) AMS Lite Usage: Color Swaps - 103 Flushed - 16.19gPrint time: 8.2 Hrs Speed Changes (after flow ratio calibration):Initial layer infill: 80 Outer Wall: 150Inner Wall: 200Top Surface: 150&nbsp;Supports: Yes

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle></boostme>This model is create from below link. I adjusted and colored the model for Bambu P1S&nbsp;Source: <a target="_blank" rel="noopener noreferrer ugc" href="https://www.thingiverse.com/thing:6475011">Bulbasaur Headphone Stand by mol820 - Thingiverse</a>&nbsp;The print must be glued together in order to not tip forward from the weight of the headphones. So long as Bulbasaur is glued to the base it is enough, but I chose to also glue the bulb to the body although that was not necessary for it to work.

Print Profile(8)

Description

Comment & Rating (258)

License

Related Models