Tapo C210 Camera Mount (Upside down) - Free 3D Print Model

Search models, users, collections, and posts

ianvale

Household>Office

IP Report

Print Profile(1)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 10% rectilinear infill, tree supports

Designer

1.7 h

1 plate

4.9(139)

Open in Bambu Studio

Boost

598

1576

158

1.4 k

1.1 k

Released

Description

I wanted a Camera mount to hold a Tapo C210 camera. I have it located on top of a bookcase, and the view wasn't great looking down (limited movement of the camera). By holding it upside down, the range is greater!

Print 3 parts, push fit, if they come out too loose, use a bit of glue. Camera should twist on and off like the original mount that comes with it.

tapo

tapo c210

Comment & Rating (158)

@kapustin

Boosted

Works well with Xiaomi camera. I also extended the height to get a better angle. Thank you for the model.

@user_281039031

Print Profile

0.2mm layer, 2 walls, 10% rectilinear infill, tree supports

great print. I extended the length of the neck in the Bambu Slicer. no issues.

@balaur

Print Profile

0.2mm layer, 2 walls, 10% rectilinear infill, tree supports

Clean print!

@Fonzie751

The top part ended up breaking. I reprinted it with more internal infill and it seems to be good now

Show original

@danilotempo

Print Profile

0.2mm layer, 2 walls, 10% rectilinear infill, tree supports

no problem and it looks great

Show original

@danilotempo

Perfect.... exactly what I needed.... I'm a beginner... but it seems to be of good quality

Show original

@sabes88

Print Profile

0.2mm layer, 2 walls, 10% rectilinear infill, tree supports

Nothing to complain about 👍🏻

@gomez89

Print Profile

0.2mm layer, 2 walls, 10% rectilinear infill, tree supports

Great work with this holder. It prints easily and without any hassle. I used the recommended settings (0.2mm, tree supports) and the result was flawless. It's a very solid design that saves a lot of modeling time. As a tip for others: if you need more angle, you can scale the neck in the slicer as some comments suggest. Highly recommended!