P1S-X1C External filter/muffler
Print Profile(1)
Description
Boost Me (for free)
Your boost is always appreciate
You will need (12) 3 x 10 mm round magnets, 2 Hepa filter CR130, activated carbon pellets and 1mm self adhesive foam tape
1- Glue part together (as indicated). Glue and insert magnets.
2- Insert magnets on the other part. Place foam between magnets and screw it (use same screws, same holes) on the printer’s back
3- Insert carbon pellets with the funnel (I use the aquarium one). Make sure they are rinsed and dried.
4- Insert the 2 Hepa filters (no need to cut anything) and put on the printer.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)