Christmas Bauble Decoration - Free 3D Print Model

Search models, users, collections, and posts

clamoraes

Household>Decor

IP Report

GIF

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 5% infill, 50mm, Adaptive Layer

Designer

2.1 h

1 plate

4.9(77)

0.2mm layer, 2 walls, 5% infill, 60mm, Cut, Adaptive layer

Designer

2.1 h

1 plate

4.9(22)

Open in Bambu Studio

Boost

1145

2929

112

1.6 k

873

Released

Description

Ornamental Christmas Baubles

You can either print with supports or if you prefer there's also another profile where the ball is cut in half so you don't need supports and you can glue them.

Both worked fine for me. Depends on your preference.

I used DIY rub and buff to get the gold/copper/color shift effect.

Feel free to share your print, I'd love to see how that looked with different filaments :)

Comment & Rating (112)

@3Daan

Print Profile

0.2mm layer, 2 walls, 5% infill, 50mm, Adaptive Layer

This printed great! I used the model with supports so I could print with my Tri-Color Gold, Silver, Copper filament. I'm thinking about painting the ball black while leaving the design bare to make it look similar to the original. update: I painted the black on and if you value your sanity I suggest not doing the same. I ended up painting whole sections black, wiping away the excess with a paper towel, then rubbing the highspots with my fingers to remove the black. Looks great though in the end!

The profile uploader has replied

@clamoraes

That looks great!! But omg I can imagine the patience you need to paint that 😂. Well done! I also suggest trying rub n buff. It is super easy and fast to paint those type of details. Thanks for sharing your results! :-)

(Edited)

@3Daan

Replying to @clamoraes :

Once I gave up on carefully painting I just slathered it in and wiped off the excess. Did you print yours in black and then use a metallic rub and buff?

(Edited)

@clamoraes

Replying to @3Daan :

Yes, that's exactly what I did. I printed in black but also airbrushed with primer before applying the rub n buff

(Edited)

@Spicyshugar

Print Profile

0.2mm layer, 2 walls, 5% infill, 50mm, Adaptive Layer

went nice and smooth :)

@Crow_ck

Print Profile

0.2mm layer, 2 walls, 5% infill, 60mm, Cut, Adaptive layer

This was my first print ever, the bauble came out beautifully, nice design.

@shorty1005

great :))

@CoffeeCo

Print Profile

0.2mm layer, 2 walls, 5% infill, 50mm, Adaptive Layer

supports came away very well.

@user_1377428891

Beautiful!!

@user_2899782140

Print Profile

0.2mm layer, 2 walls, 5% infill, 60mm, Cut, Adaptive layer

I would prefer a single merged ball, but at lest the print is flawless ;)

@user_1990849133

gorgeous colour , what filament is that

@user_2899782140

Replying to @user_1990849133 :

metal bronze from elegoo :)

@christian1965

Print Profile

0.2mm layer, 2 walls, 5% infill, 50mm, Adaptive Layer

@undyingember

Made several like this.

@JoelK1968

love this!! thank you. is there any way you can make this so it prints larger bulbs?

@user_1377428891

You should be able to scale it up, can't you??

@czechczerv

Print Profile

0.2mm layer, 2 walls, 5% infill, 50mm, Adaptive Layer

very nice 👍🏻

@user_3230374269

Print Profile

0.2mm layer, 2 walls, 5% infill, 60mm, Cut, Adaptive layer

This turned out as good as the one with supports. I like the Bambu Silk PLA so i used it again. Thank you.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.