Princess Luna My Little Pony - Free 3D Print Model

Search models, users, collections, and posts

Remixed by

Lief_Erikson

Art>Sculptures

IP Report

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

solid color | 0.12mm layer, 3 walls, 20% infill

Designer

14.4 h

1 plate

4.7(15)

multi color ams | 0.16mm layer, 2 walls, 15% infill

Designer

34.9 h

1 plate

4.8(6)

Open in Bambu Studio

Boost

303

682

866

306

Released

Description

its just a converted reupload, other than changing the file type, adding colors suitable to 4 color ams and slicing it I did not change anything.

Comment & Rating (46)

@McGregor002MM

Print Profile

multi color ams | 0.16mm layer, 2 walls, 15% infill

Great project, highly recommended.

@Evosofast

did you hand color or use diff color filament

@McGregor002MM

I printed using colorful PLA from Sunlu, mainly Silk and 2.0. Halfway through the print, I realized the project had over 900 filament changes 😆, but when I finished, I decided it was worth it because it turned out beautiful.

(Edited)

@polwop21

this came out great! i scaled it larger to match the other figures my kid has, and they love it! thank you

The designer has replied

@Lief_Erikson

looks amazing, i would have released large files too though for uploaded print profiles has to be printed and i didn't want to print it 5x or so 😅

(Edited)

@vielfellig

Boosted

Print Profile

solid color | 0.12mm layer, 3 walls, 20% infill

A truly stunning profile 🤩

The profile uploader has replied

Show original

@Lief_Erikson

Thank you, the print looks fantastic 👌👌

Show original

@Max_VF

Print Profile

solid color | 0.12mm layer, 3 walls, 20% infill

Printed with iridescent dual-color filament, and the result was excellent

The profile uploader has replied

Show original

@Lief_Erikson

Indeed looks awesome 👌

@sedawk

About 360 swaps on the H2D, but the granddaughter loved it!

@vielfellig

Boosted

Reduced the size to 15cm height and printed it with color-changing filament It turned out great

Show original

@jziarnik1

Boosted

Print Profile

solid color | 0.12mm layer, 3 walls, 20% infill

Great print! I have modified supports a Little in your first option and it turns out beautiful. Thank You:)

@MrMadness

Boosted

The print profile is no longer public

Thank you for uploading this model! Printed absolutely beautifully with "strong supports" on A1 Mini using Elegoo Rapid PLA+ filament. "Strong" is an understatement though, I've spent a good 30-60 minutes removing the supports after soaking it in warm water 7-8 times. They came off perfectly in the end, with the model intact. My daughter adores it.

The profile uploader has replied

@Lief_Erikson

thank you for the review, i made the supports this extreme since i got multiple complaints about it failing due to stability. this one will work for sure, just needs some aftercare ^^

@matokro

Print Profile

solid color | 0.12mm layer, 3 walls, 20% infill

Have to try it again. A1 knocked a leg over half way through the print.

The profile uploader has replied

@Lief_Erikson

you can download the stl and add a disc under the foot, as well as slice ir at a higher layerhight which reduces the rist if having it knocked over and or add stronget supports, just be aware it will take you a while removing them later. good success and happy printing :)

(Edited)