Pipe Clamp - Cam Lock, Print in Place - Free 3D Print Model

Search models, users, collections, and posts

SqueakyRobot

Tools>Other Tools

IP Report

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.6mm nozzle, 0.24mm layer, 5 walls, 15% infill

Designer

21 min

1 plate

4.5(14)

PLA: 0.6mm nozzle, 0.24mm layer, 5 walls, 15% infill

Designer

20 min

1 plate

4.5(2)

Open in Bambu Studio

Boost

268

756

662

273

Released

Description

Pipe clamp with a cam lever for tightening. It is for a 29-30mm pipe but should be re-sizable, within reason. It can be printed with the lever in place or separate and snapped on after printing.

I have only printed it in PETG on my Bambu Lab X1C and have not done thorough testing for strength and durability. It does work for my use case.

My Print Settings

Material: PETG or PLA
Layer Height: 0.2
Perimeters: 5

Boost Me (for free)

If you find this useful, boosts are appreciated!

Comment & Rating (17)

@user_2385966075

Boosted

Print Profile

0.6mm nozzle, 0.24mm layer, 5 walls, 15% infill

great clamp using it to hold a parts shelf to work in my bike shop

@user_3953863195

Boosted

Boost for the dog pic. 🙂

@JCaceres25

Print Profile

PLA: 0.6mm nozzle, 0.24mm layer, 5 walls, 15% infill

Just perfect! The only "risk" is that the "flip" can fall down if it goes all the way vertically downwards. But otherwise, when it's clamped it is sturdy and secure.

@user_1124494241

Print Profile

0.6mm nozzle, 0.24mm layer, 5 walls, 15% infill

simple design that works. I may modify it to use in an upcoming project.

@scr5008

Boosted

Print Profile

0.6mm nozzle, 0.24mm layer, 5 walls, 15% infill

had to play with the scale a bit to get the right size for the pipe, but I printed out of PA-CF and they are doing great. very strong.

@Labradorite

Print Profile

0.6mm nozzle, 0.24mm layer, 5 walls, 15% infill

Good idea, but a little slight for my needs.

@FireMedic541

Print Profile

0.6mm nozzle, 0.24mm layer, 5 walls, 15% infill

very weak, nice idea though

Strength Issue:weak, breaks very easily

@philip.holland2

Print Profile

0.6mm nozzle, 0.24mm layer, 5 walls, 15% infill

@Winston0930

Print Profile

0.6mm nozzle, 0.24mm layer, 5 walls, 15% infill

@cschneid

Print Profile

0.6mm nozzle, 0.24mm layer, 5 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.