Bambu Lab A1/mini Lead Screw Deep Cleaning and Maintenance Tool V2 with Extended Threads (20-minute 5g print)

Print time and materials: A practical 5g gadget that takes 20 minutes to print. Most filament materials are usable; I personally used Bambu Lab PLA stone grey.

Product name and function: Bambu Lab Lead Screw Quick Maintenance Tool V2. Extended screw threads allow for a thorough cleaning of your machine in minimal time, regularly providing a quick deep clean for both your machine and your peace of mind.

Target audience: Currently perfectly compatible with Bambu Lab A series; results are exceptional.

Instructions: Attach the maintenance tool to the lead screw and move it slightly to ensure proper engagement (it is recommended to place a small piece of tissue paper inside and spray some WD-40 for more thorough cleaning). Machine operation—automatically raise or lower the heatbed to move the cleaning tool up and down with the lead screw. Repeat once or twice, then use a fresh sheet of paper and repeat. Once cleaned, you can place lubricating grease at the top of the tool and repeat the heatbed movement to lubricate the lead screw.

Design philosophy: Deep cleaning of the lead screw requires a threaded tool, so this tool was designed for everyone to use. This is the latest version with extended threads for faster and more effective cleaning.

Recommended number of prints: Print a single unit for individual cleaning, saving material. For a more efficient cleaning process, those with ample materials can print two at once.

Precautions: When controlling the up and down movement of the heatbed, please note that once the tool reaches the top or bottom, do not continue to move the heatbed.

Finally: Thank you for choosing my design. If you are satisfied, please give me a like to motivate me to continue serving you. Of course, for those who give me a rocket, I'll give a deep bow in return.