TPU 95a Speed Profil

Here is the updated version with your additional note:

German 🇩🇪

Optimized TPU 95A Profile for High-Speed Printing 🛠️🚀
This specially designed and optimized profile is ideally suited for TPU 95A prints at speeds up to 150 mm/s. Testing was conducted using Eryone, Sunlu, and Bavaria TPU 95A filaments.

⚠️ Important: Please do not print via the app, as this will only utilize the test model.

Instructions:

1. Load the 3MF file into Bambu Studio.
2. Add your own print file and adjust it accordingly.
3. To achieve the full speed potential, the maximum volumetric speed needs to be determined. I have selected 5 mm³/s without calibration, which equates to approximately 75 mm/s.

Here is a link to a calibration test by Keenzcustoms on Printables:
Max Flow Test Tower for X1C – Keenzcustoms

Happy printing! 🖨️✨

English 🇬🇧

Optimized TPU 95A Profile for High-Speed Printing 🛠️🚀
This custom-designed profile is perfect for TPU 95A prints at speeds of up to 150 mm/s. It has been tested with Eryone, Sunlu, and Bavaria TPU 95A filaments.

⚠️ Important: Do not print via the app, as it will only print the test model.

Instructions:

1. Load the 3MF file into Bambu Studio.
2. Insert and adjust your own print file accordingly.
3. To achieve full speed, you need to determine the maximum volumetric speed. I selected 5 mm³/s without calibration, which corresponds to approximately 75 mm/s.

Here’s a link to a calibration test by Keenzcustoms on Printables:
Max Flow Test Tower for X1C – Keenzcustoms

Happy printing! 🖨️✨