Hue / Govee light Bar Arms for aluminum profile
Print Profile(1)
Description
These are the arms to mount Govee(H6056) or Hue lights on a monitor stand.
The light bar adapters will be posted separately.
It is designed to be mounted with 8 m6 t-nuts. You will need 4 12 or 16 mm m6 bolts and 4 30mm m6 bolts.
For each arm joint you will need a 60mm m6 bolt and m6 nuts .
I recommend that you use washers in the arm joints.
You can use 8020 slot cover to hide the wiring.
There is a right and a left arm in case you want to have your tightening nuts in a preferred orientation
Plate 6 is some spacers to raise higher than 32cm I would not us mor than 6 cm in spacers.
I only posted the project file (3MF) because any negative parts will be lost in Bambu Studio when I attempt to mesh them.
This is my first upload so be gentle!
Govee H6056 mounts
Govee (H6056) aluminum Extrusion mounts by steliosdroid - MakerWorld
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (9)