Fujitsu Futro S720 SSD / HDD removeable Caddy - Free 3D Print Model

Search models, users, collections, and posts

Fabian91withP1s

Hobby & DIY>Electronics

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

1.1 h

1 plate

5.0(3)

Open in Bambu Studio

Boost

Released

Description

Hello, this model is a removable SSD/HDD caddy for a Fujitsu Futro S720. If a PCI-E card with two SATA ports is installed and a USB-SATA adapter cable is used, 2 HDD/SSD can be stowed in the Futro housing with this caddy. If there are any problems with this model, please contact me.

Comment & Rating (6)

@lulzim007

Print Profile

0.2mm layer, 2 walls, 15% infill

perfect fit

@user_765640899

what cable are you using exactly? unfortunately I can't find anything

Show original

@user_3544309654

The perfect hard drive/SSD holder for the Futro S920

Show original

@mayniklas

I love that this houses 2 drives and that it is so easy to install and remove! :D Printed it in PCTG on A1 Mini and the small issue I had was that the holes to attach the SSD to were about half a millimeter too close. (That could, of course, have something to do with PCTG.) So I dediced to just slightly scale the model on the Z axis to ~100.7%. Pro tip: besides the SATA port that is present under the CPU heat sink you can just an mSATA to SATA board that plugs in the mSATA port with all the cables included (around 6€ from AliExpress) - you would have to get rid of the mSATA itself for this but as the included ones are usually suuuuuper small that's not a big sacrifice in my opinion. (Another option would be to somehow attach a SATA to USB converter internally, USB pins are there after all.)

(Edited)