user_1854460657

cover

d84cdfe7b5e8841495427df536d0a03.jpg

ae1bea8427615b0720a77c1d24d8ce3.jpg

79acb2959ae44d02af48658bfe651c9.jpg

e5f19e7d4cf03e805e3b04ceb39913d.jpg

plate_1.png

2024-12-09_dea54970ac14c.jpg

<p>Add supports, default, leave others unchanged</p>

0.2mm layer, 2 walls, 15% infill

<h2>特别注意！！！</h2><ol><li><h2>该件已经过测试，<strong><u>需准备502强力胶水用于粘贴链条两端接缝处</u></strong>（靠内一端口子太小FDM无法打印封闭口，所以需要胶水固定）</h2></li><li><h2>拆支撑时小心链条处支撑，虽然参数够硬，但还是会有断开的风险！！</h2></li><li><h2>支持二次创作，欢迎探讨互相学习</h2></li></ol>

<h2>Special Note!!!</h2><ol><li><h2>This item has been tested, <strong style="font-weight:bold;"><u style="text-decoration:underline;">502 super glue is required to bond the chain ends</u></strong> (the inner end is too small for FDM printing, therefore glue is needed for fixing)</h2></li><li><h2>Be careful with supports around the chain when removing them, although the parameters are strong enough, there is still a risk of breakage!!</h2></li><li><h2>Secondary creation is supported, welcome to discuss and learn from each other</h2></li></ol>

Print Profile(1)

Description

Special Note!!!

This item has been tested, 502 super glue is required to bond the chain ends (the inner end is too small for FDM printing, therefore glue is needed for fixing)

Be careful with supports around the chain when removing them, although the parameters are strong enough, there is still a risk of breakage!!

Secondary creation is supported, welcome to discuss and learn from each other

Comment & Rating (0)

License

Related Models

An ordinary fire hydrant