Ghostbusters Leg Hose Quick Disconnect
Print Profile(1)
Bill of Materials
- 8x3mmNeodymiumMagnet x 2:
- GBFansLegHose x 1: https://www.gbfans.com/shop/uniform/yellow-uniform-hose/
- GBFansRubberHoseConnector x 1: https://www.gbfans.com/shop/uniform/tan-rubber-uniform-hose-connector/
Description
This is a quick disconnect system for the GB Fans Leg Hose and Rubber Hose Connector. It consists of three parts: two hose plugs and the back plate. One hose plug is meant to be used with a split key ring for attaching to the uniform belt. The other plug can fit an 8x3mm neodymium magnet that works with the same size magnet in the back plate. The back plate can be sewn on the inside of the uniform to hold it in place. This allows the hose to connect via the magnets, without requiring it to be permanently affixed to the uniform.
The magnets should pressure fit. However, you can also scuff one side with sand paper and use super glue to hold it in place.
I have included the Fusion 360 models for remixes in case anyone needs to adjust the models for different sized magnets, or a different version of the hose connector.
License
Comment & Rating (5)