There's Coffee in that Nebula - Janeway Quote
Print Profile(1)
Description
This HueForge print is based on a quote by Captain Janeway from Star Trek: Voyager Season 1 episode 6 “The Cloud”.
The image was generated in Leonardo.ai using “There's coffee in that nebula” as the image prompt and was then converted to a printable format using HueForge.
The file should load in at 200x200mm, if not, it's easily resized. Be sure to UNCHECK Uniform Scale and only adjust the X and Y sizes to 200mm each.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #15 (1.28mm) swap to Jade White for the rest.
Recommended Frames:
https://makerworld.com/en/models/709013#profileId-639290
https://makerworld.com/en/models/559845#profileId-479071
And if you're starting to get obsessed with HueForge prints, check out these multi-print frames….
https://makerworld.com/en/models/619191#profileId-543110
License
Comment & Rating (3)