Hello, 5015 version will be uploaded within the next 2 hours, you'll have to modify the 5015 housing on the screw mounts slightly to sit flush with the metal shroud. (4mm lower to fit the threadstuds) 
you may be able to switch the 5015 components into the klp1 fan housing.

I believe i have to change the whole flow path to perform good with a 5015 fan.....  

PW Dynamics

Printed mine in PETG (for now) and it came out well. A bit of support painting is needed to not plug up the exit gaps.

Overall, prints and installs well. MY only observation is that the top ring surface is 0.2-0.4mm too high(printer that printed it is skew corrected and accurate), but that could have been my first layer bulging a bit.

Any chance for a 5015 std fan opening version?

LANPartyCEO

user_1288424471

ABS 0.2mm layer, 2 walls, 15% infill

cover

WhatsApp Image 2024-12-08 at 19.14.35.jpeg

WhatsApp Image 2024-12-08 at 19.14.34.jpeg

WhatsApp Image 2024-12-08 at 19.14.35(1).jpeg

plate_1.png

2024-12-08 19_28_16-SOLIDWORKS Connected Maker - [Kingroon KLP1 230 Fan Duct(1).sldprt _].png

ABS variant, added Brim for Bed-adhesion

2024-12-08_dc7fef8d6ad3b8.jpeg

PETG 0.2mm layer, 2 walls, 15% infill

https://kingroon.com

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Consider leaving a free boost to appreciate my work.</boostcontent></boostme>&nbsp;&nbsp;Remixed original fan duct for Kingroon KLP1 230 Model, added ring design to equalize the airflow from all sides.&nbsp;Make sure to use at least PETG as the original is from PLA and warps during use.&nbsp;

KLP1 230 Fan Duct

2025-01-22 17_52_18-Window.png

KLP1 230 Fan Duct for 5015 Fan

ASIA

Print Profile(2)

Description

Comment & Rating (3)

This remix is based on

License

Remixes (1)

Related Models