Wheel shelf for 4 Post Storage Lift (1:28)

Since I was designing some rims for my Xmods (1:28 scale RC cars), I needed a way to store them next to the cars. So, I created a storage shelf compatible with the 4-Post Storage Lift referenced as a remix, as I had already printed one earlier.

The shelf simply hangs under the screw used to mount the base of the lift to the post.

I included all the parts on a single print plate, so you can select the parts you need and remove the rest.

It can also be used to connect two lifts together. In that case I only mounted the top shelf, since the lower one is harder to access.

The parts are as follows:

• Arms for the shelf (positioned in 2 orientations, for matching surfaces, depending on the side you want to mount them)
• Base of the shelf (one with grooves for storing rims without tires, and one with a flat surface)
• Connectors for the outside of the shelf for improved stability (as mounted on the last picture)

I also plan to upload the rims to my profile, as soon as I'm happy with the print profiles.