Search models, users, collections, and posts
Ekko and Jinx kiss Arcane
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
4.1 h
1 plate
Open in Bambu Studio
Boost
5
14
0
0
6
1
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 500x260.9mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Beige Transmission Distance: 8
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Blue
At layer #7 (0.64mm) swap to Beige
Border Only Colors from here until the end.
At layer #16 (1.36mm) swap to White for the rest.
License
This user content is licensed under a
Creative Commons Public Domain
Comment & Rating (0)