Atari Game Box Art Coasters with Joystick Case (9)

This is a set of (9) Atari game box art coasters, each featuring some of the most popular original Atari games of yesteryear. Each coaster requires no more than 8 different colors and about 2 hours per coaster. The coasters measure 100mm x 100mm x 3mm (about 4" x 4" x 1/8"). Also included is a cool Atari joystick coaster holder that I borrowed from JL4539's coaster set. The joystick box can have a “functional” spring button by inserting a cutoff piece of spring from a clicking ball point pen.

To finish the joystick trim, insert the red trim ring into the black trim ring with a few dots of glue to hold it in place.  Then slide the red button into the hole in the black trim ring and use glue to attach it to the joystick lid.  If you insert a spring for the button, you will probably need to put something to weigh it down while the glue sets.  I used epoxy for that step but some thick CA glue or similar should also work.

The joystick box is sized to fit all 9 coasters. I may add more coaster designs if these prove to be popular.