IKEA Pansartax Lid Clip (IKEA Dry Box)

Hi there,

Here is a simple clip to close the IKEA Pansartax boxes.

I store different filaments in these boxes and get about 15-20% humidity (of course always depending on the environment). I sealed the edges of the IKEA Pansartax box with duct tape and silicone.

For the lid, I used standard door insulation from the DIY store (1,5 - 3,5 mm).

To reduce the humidity, I used 2 x this model for drying - There are a number of measurement options available from Amazon or similar stores.

##Update 02##

add: new slim version for boxes without insulation (Pansartax_clip_Side_slim_ohne_dichtung.stl)

##Update 01##

add: slim version - thanks to @MakerJoe https://makerworld.com/en/u/2040172352

If you also need a nice silica box - check this model from MakerJoe https://makerworld.com/en/models/135642#profileId-147437