Mr_Andre

cover

3.jpg

plate_1.png

Spinner ver2 20mm     -     0.2mm layer, 2 walls, 15% infill

Spinner version 2, 16mm - 0.2mm layer, 2 walls, 15% infill

2024-12-07_5ce84d3a8ede08.gif

Spinner version 2, 12mm - 0.2mm layer, 2 walls, 15% infill

Spinner version 2, 18mm - 0.2mm layer, 2 walls, 15% infill

Spinner version 2, 14mm - 0.2mm layer, 2 walls, 15% infill

user_1156298667

PXL_20260604_100924905.MP.jpg

PXL_20260604_100918755.MP.jpg

So kann man bequem in der App mehrere Größen gleichzeitig drucken.Wenn sich der Spinner zu Beginn nicht richtig dreht,  die beiden Ringe mit Messer oder Gabel trennen.

This allows for easy printing of multiple sizes simultaneously in the app.If the spinner does not turn properly at first, separate the two rings with a knife or fork.

all sizes - pla

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>If you enjoy my models and would like to show your support, please consider donating a boost! Your contribution would mean a lot to me. 😊</boostcontent></boostme>This is my secound version of my Fast Fidget Ring SpinnerAfter printing Spin the spinner hard for 2 minutes to loosen all the locks, after that it should spin beautifully.I recommend some lube after printing for best results.You will get the best result by printing with PETG.Print without support.

Fidget Ring Spinner 12/14/16/18/20 mm

ASIA

Print Profile(6)

Description

Comment & Rating (86)

License

Related Models