ToneX One Guitar Strap Button Attachment

This lets you attach your IK ToneX One pedal directly to a guitar strap button (strap can go on at the same time).

The pedal can be powered with your smartphone and you can use headphones for output. Use a short patch cable to connect to your guitar and you'll be able run around your neighborhood practicing your riffs! Although visibility is limited when attached, the pedal can be quickly removed for tuning or adjustments.

Installation: 

Remove the four screws at the bottom of the pedal, position the attachment, then use the same screws to screw everything back together. Depending on the type of your strap button you may have to use a knife or something to make the slot a bit wider.

Attention 1:

The attachment may not be fully durable over time. For added security, consider using the alternate design (ToneXOneAttachment2.stl), which is potentially more robust but requires longer screws (4 x M3*16).

Attention 2:

Use ToneXAttachment3.stl for pedalboard attachment (easier velcro application) following acantocephala's idea

Attention 3:

When powering the pedal with a smartphone, ensure “direct monitoring” is enabled to avoid muting due to audio interface mode. A power bank might work better.