Skadis – Corner Connector

This sturdy corner connector is a must-have complementary piece for the Skadis stand – Corner (https://makerworld.com/en/models/854555).

Inspired by the fantastic horizontal connector for Skadis by @AU3D (https://makerworld.com/en/models/471800?from=search#profileId-381485), I recreated this one from scratch, making slight adjustments to the hooks and reinforced the corner for added strength.

This piece requires printing with supports, but don’t worry—if you let your print plate cool properly, the supports should come off easily. The bottom part may be a bit rough after removing the supports; you can sand it down or leave it as is since this part of the print won’t be very visible.

Once installed, this connector securely fixes two Skadis desks together, leaving almost no gap between them, as shown in the photos.