Water Bottle Cage Stored Bicycle Parking Bracket Bicycle parking bracket V2
Print Profile(1)
Description
A road bicycle parking support, suitable for temporarily parking road bikes outdoors or indoors. The bracket conveniently stores on a water bottle cage during rides.
Perfectly compatible with Decathlon RC100 V1 and V2.
Other bicycle brands are usable provided the dimensions closely match the image below. You can also scale the print file to fit your bicycle crank size.
Caution! If adjusting length, only scale the longer side; otherwise, compatibility issues with the water bottle cage may arise.
The print profile is uploaded. I recommend using my uploaded print settings for less material usage and easier support removal.
Boost Me (for free)
if you like this model please boost me
A road bicycle parking support, suitable for temporary outdoor or indoor parking of road bicycles. The bracket can be stored on a water bottle rack during cycling
Perfect for Decathlon RC100 V1 and V2
Other brands of bicycles can be used as long as the size meets the requirements shown in the following figure without too much deviation. You can also scale the printed file according to your own bicycle crank size.
be careful! If length adjustment is required, only the long side can be scaled, otherwise there may be compatibility issues with the kettle rack accessories.
The printing configuration file has been uploaded. It is recommended to use the printing configuration uploaded by myself for printing, using less materials and easier to remove supports.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)