Gridfinity Power Brick Holder - Free 3D Print Model

Search models, users, collections, and posts

Luke

Tools>Organizers

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 10% infill

Designer

4.6 h

1 plate

4.9(42)

Open in Bambu Studio

Boost

139

754

519

Released

Description

Organize your charging bricks effortlessly with this Gridfinity charging brick holder accessory. These 3D-printed models are designed to fit seamlessly into the standard 42mm Gridfinity layout, offering a clean and practical solution for managing your iPhone or similarly sized charging bricks.

Features:

• Gridfinity Standard Fit: Compatible with the 42mm standard Gridfinity system for easy integration.

• Versatile Size Options: Named using the convention LxWxH, where:

• L (Length) and W (Width) represent the number of standard Gridfinity grid units.

• H (Height) indicates the holder’s height in Gridfinity units (approximately 7mm/unit).

• Compatibility: Options available to fit standard iPhone charging bricks as well as slightly larger or wider bricks, depending on the selected size.

• Solid-Bottom Design: These models do not include cut-outs for magnets, providing a stable base for your charging bricks.

Looking for a UK version of this design? See my new model here

Boost Me (for free)

Please consider boosting me so I can continue to design new models and release them here! Please leave any suggestions in the comments below

Comment & Rating (48)

@iskall900

Print Profile

0.2mm layer, 2 walls, 10% infill

good print

The profile uploader has replied

@luke406

Glad to here! That print looks great

@goodq

Print Profile

0.2mm layer, 2 walls, 10% infill

so clean

@CyberJPrinter

Print Profile

0.2mm layer, 2 walls, 10% infill

smaller blocks fit easily in them but I can’t fit two normal sized ones in side by side

@wane27

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

Great idea and great print. Wish the slots were slightly tighter so that there was the tiniest amount of resistance when you put a plug in there, but seems fine if you keep it upright.

@user_3083824173

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

Clean print! Used ironing which came out rather nice. The design is simple but effective.

@user_2421495606

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill

Perfect for storing my chargers in my Gridfinity storage system within my Alex drawers

Show original

@brentking

Boosted

Fantastic, is there a UK plug (three rectangular pins) version? Thank you

The designer has replied

Show original

@luke406

thanks for the suggestion. I do not have one currently, but I can look into the specifications for adding that!

@brentking

Boosted

Replying to @luke406 :

https://www.printables.com/model/390802-gridfinity-uk-plug , I found this version in 2x2 grids as reference, the size of holes is correct, hope it could helpful for re-design in 1x1 version.

(Edited)

@luke406

Replying to @brentking :

I have uploaded a new model for the UK standard of plug. You can find it listed here: https://makerworld.com/en/models/1106050#profileId-1101894 If you end up printing that model, please let me know how it works as I dont have any plugs to test here in the US.

@user_3014139532

Print Profile

0.2mm layer, 2 walls, 10% infill

works great helping me get organized. Love the variety!

@STR4

Print Profile

0.2mm layer, 2 walls, 10% infill

Very useful! Wish they had a 3prong US-version

@ezprintz

Boosted

Great

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.