Print Profile(3)
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x150mm in size
You may print at higher layer heights below the Min Depth of 1.1mm
The Max Depth is 2.6mm and the Actual Depth is 2.6mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Sunlu Meta red Transmission Distance: 7
PLA+ Sunlu Yellow Transmission Distance: 10
PLA Sunlu Green Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to red
At layer #20 (1.68mm) swap to Yellow
At layer #25 (2.08mm) swap to Green for the rest.
Boost Me (for free)
Boost if you like this model! I also accept model requests
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (12)