Rotating Ferris Wheel
Print Profile(2)
Description
Requires a 42 stepper motor, two flange bearings with an outer diameter of 14mm, an inner diameter of 8mm, and a thickness of 4mm (slightly thicker is acceptable). Materials other than the timing belt can be bamboo PLA or PETG. If you don't want to buy a timing belt, you can use TPU. I used TPU 95A with 20% infill; higher infill is not recommended. The timing belt pulley is 2GT. You can also 3D print this if you don't want to buy it; the file is uploaded. The control part is simply a basic 42 stepper motor control; open-source options are available online.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)