AMS lite QUICK wall mount - Free 3D Print Model

Search models, users, collections, and posts

szczudlo robi

3D Printer>3D Printer Accessories

IP Report

GIF

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

AMS quick wall mount

Designer

6.4 h

1 plate

4.9(260)

Stronger orientation - 0.2mm layer, 3 walls, 25% infill

7.2 h

1 plate

4.8(37)

Open in Bambu Studio

Boost

1133

2890

393

233

4 k

2.7 k

Released

Description

Fast and convenient wall mount for AMS lite A1/A1 mini. When printing, use supports for the holder, do not use supports for the bolt and nut.

New version!!! Now you can mount this bracket to the TV wall mount bracket standard VESA 100x100 link: HERE

Boost Me (for free)

If you like it boost it Thanks :)

Comment & Rating (393)

@KaiserKane

mine broke after 3 weeks of use, never used 4 spools, maximum of 3 spools at the same time

@Paxy_01

What did you print it with

Show original

@Capy_King2014

did you use PETG? Because I am going to print using that.

@Timbabwe

Print Profile

AMS quick wall mount

printed with white basic PLA. works great I have it mounted right above my printer so hopefully it holds up well.

@JTG_THE_MLO

any complaints so far? I'm about to do the same as you and need to know before I spend the filament.

@Timbabwe

holding up perfectly so far. seems very sturdy.

@Wilmiguel

Boosted

Hello, I want to print in PLA Basic, is it alright if you recommend it? I hope for your assistance, thank you

(Edited)

Show original

@knochi

Print Profile

AMS quick wall mount

printed in PLA CF and gave a very nice and smooth finish. where did you get the four additional screws from? my AMS lite was assembled with 4 screws but there are eight holes. I think the screw holes in the model could have recesses for the screw heads of the original screws to allow them to be screwed in as deep as originally .

The profile uploader has replied

@szczudlo

you can find the screws in the box with accessories that you get with the printer in the set. Deepened holes for the screw head are quite a good idea, it would look nicer visually. I wouldn't worry about the depth of screwing the screws, they screw in deep enough in this holder, they hold like mad. My holder has been hanging for 2 months now, everything is ok. Thank you for the great rating, best regards.

@quezak

Boosted

Late to the party but maybe this reply will help others :D The original mount uses only 4 screws that are shorter because they are recessed in the mount. The AMS Top Mount kit has 8 longer screws. It is included in the A1+AMS combo packages, but if you buy the AMS separately, you also need to buy the top mount screw kit separately, or get the screws elsewhere. The short screws should still be safe-ish with this mount, but there's not a lot of thread left to screw them into the AMS, so to be on the safe side I preferred to use the long ones.

(Edited)

@willseconds

Boosted

it fell about 5 minutes ago. it was not fun waking up at 5:00 A.M. to a collapsed ams

The designer has replied

@szczudlo

I'm sorry this happened to you. You're the first person to have this happen. May I know what percentage of fill you used when printing this design? How long was it hanging on the wall before it broke?

@willseconds

Boosted

I did not change any settings ( i printed it from Bambu handy) and it was hanging for about 2 weeks

@ctod85d8td9yc0y

it works great in pla

(Edited)

@Ektwp.hj

hello excuse me do you use the PTFE tubes that come with the AMS or did you have to buy them to extend it

Show original

@Capy_King2014

Nice pink

@hafizul

tq bro.. nice

@Ektwp.hj

Hello sorry did you have to extend the PTFE tubes

Show original

@Capy_King2014

Replying to @Ektwp.hj :

Did you buy the combo, or did you buy the am sepretly?

@rykardoap

Boosted

I don't know why it won't let me rate you, friend. But 10/10, I printed it with PETG using a 0.8 nozzle and everything has been excellent so far

Show original

@user_1334324617

Boosted

forfot to show photo

@Puranos

Print Profile

AMS quick wall mount

Many thanks. Printed in PETG and it seems incredibly stable

Show original

@Neek72

brother your build plate😨

(Edited)

@Waschbaer74

Boosted

A truly splendid rendition Excellent print quality, it projects an image of remarkable stability

The designer has replied

Show original

@szczudlo

Thank You!!!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.