Drawer Or Box Divider - Custom size Generator

Drawer Organizer MYO (Make You Own)

From today you can generate any size and length of your organizer yourself, 
regardless of whether you need it for a drawer or a small box, you can freely set the size and print it.
If you need to make long divider, just print 2 pcs. of Connectinc element.

Remember that the parts will only fit together if they have the same dimensions (height and thickness).

You can also determine how long this organizer will be depending on your needs or the capabilities of your printer:
For X1,P1,A1 it is about 24cm, for A1 mini it is about 17cm.

GENERATOR SETTINGS - CUSTOMIZER (Parametric Model Maker):

HOW MANY ELEMENTS:
In the first part, you set the length of the organizer by setting the number of elements you need, by default size it is a maximum of 24 elements (the length in dimensions depends on the width and thickness settings in the professional settings).

You can immediately create up to 3 organizer pieces, each with a different number of elements.

LEF (Last Element Flat) - mark whether you want the last element to have a connecting element

Connector - Generate Connecting elements - choose how many.
Connector element is tight and you need to use a little more force to insert it.

GenerateLenght - Generate Lenght of element, added at user request.
I recommend turning it off when we generate a ready-made design for printing, because we will have this text in Slicer

PROFESSIONAL SECTION

In the Professional section, you can change the settings for the organizer's height and thickness.

Height - simply corresponds to the overall height.
Width - Corresponds to the width of the higher element (without the connecting element)
Thickness - corresponds to the thickness of the entire element, and to the size of the connecting element), connecting elementi is thicker for better fit.

Rounded Edge - you can make the corners to be slightly rounded, this should help to fold the organizer more easily and improve print quality. Disabling it will allow you to generate the project faster, useful when you are choosing settings.
Loss - Losseness - What percentage of looseness. The connecting element can be wider to avoid assembly problems.
CutOut - The indent size of this small connecting element. In percentages.
 

If you need any improvements or have found any errors, let me know and I will try to fix the project.

Standard 4 plate size from 3mf file is:
Height: 60mm / 40mm / 30mm / 15mm
60mm fits with IKEA kids desk 😁