Turzx 5-inch secondary monitor top cover, interface dust cover, and Windows Hello camera placement

Give your secondary monitor a hat! O(∩_∩)O～

This is a top cover specifically designed for the Turzx 5-inch USB secondary monitor. I created this based on two personal needs:

1. This small screen has two USB interfaces: a side Type-C port and a top 4-pin interface (which can connect directly to the USB pins on the motherboard). Because I use the C port, the 4-pin port is unused. However, as it's located on top, the manufacturer didn't provide a dust cover, making it prone to dust accumulation (see Figure 5). Therefore, I decided to create a dust cover for it (see Figure 3 for the dust-proofing effect).

2. My Windows Hello camera is usually placed on top of the secondary monitor, and its base obscures the top portion of the screen (see Figure 6). So I decided to raise the top of the secondary monitor to prevent the camera base from blocking the screen (see Figure 4 for the effect of raising the camera).

Honestly, this is a highly personalized need. I don't expect many people will have this same requirement, but since I've made it, I'll share it in case it's helpful to others～

This is my second model. It was directly created using Bambu Studio. Please forgive any imperfections. Thank you!