benson

cover

IMG_3146.jpg

Ampstand_Rendering.png

IMG_3147.jpg

IMG_3148.jpg

IMG_3151.jpg

plate_1.png

plate_2.png

2024-12-05_5e591881cccc28.jpg

<ul><li>0.2mm layer height</li><li>tree supports for better print of the holes in the stand</li></ul>

0.2mm layer, 2 walls, 15% infill

KapitolaKreations

Spark2 Amp Stand A1 Mini Photo 1.jpg

Spark2 Amp Stand A1 Mini Photo 2.jpg

Spark2 Amp Stand A1 Mini Photo 3.jpg

Spark2 Amp Stand A1 Mini Photo 4.jpg

Spark2 Amp Stand A1 Mini Dovetail.png

I cut each piece in half using an angled dovetail joint and they all fit nicely onto one A1 Mini plate. &nbsp;This was my first time noticing the groove angle in the cut feature and it worked really nicely. With a 0.05mm clearance, you can push the two pieces together and they pretty much stay together without any glue! Of course, they will still fall apart if knocked, so a few drops of glue in the dovetail joint is a good idea. &nbsp;Tree supports work well here. Also I added some brims on the sharp corners where the parts are cut, as otherwise they lifted. &nbsp;I printed this in <a target="_blank" rel="noopener noreferrer ugc" href="https://siddament.com.au/collections/matte-p/products/matte-black-petg">Siddament Matte Black PETG</a> and it looks great! You&#39;re probably only printing 1 of these so you may as well print in 0.12mm Fine&nbsp;Thanks to the original designer for putting the original file together.

Single Plate A1 Mini, 0.12mm layer, 2 walls, 15% infill

I created a simple amp stand for the Positive Grid Spark 2. Not much to say, just print both parts with tree supports for best quality, plug them together and place the amp on top.&nbsp;Have fun!

Amp Stand for Positive Grid Spark 2

ASIA

Print Profile(2)

Description

Comment & Rating (7)

License

Related Models