Drip / pour over coffee station (hario v60/melita)

My take on a drip-station. I included two models, whichever you like, including a drip tray.

I use the Melita filter holder for 1 cup, but it can do more cups as well. It is designed to be able to hold the Hario V60, using their measurements. The opening has a diameter of 55mm, which is a few milimeters more than the Hario for easy attachement

It features a small drip/leak tray. One of my partner's annoyance that I keep the filter holder on the edge of the kitchen sink. She always drops it. Now, I can just let it drip, and clean out this leak tray later. You can disassemble the leaktray easily, and fits right onto the slightly recessed area of the dripper. The little gap between the dripper and the mug, instead of on top, will make sure no vacuum will form and the coffee will drip better into the mug.

A small note:

The second model (open dripper), is slightly less strong. It can hold the dripper with coffee and water with ease, but it doesn't have the same strength as the ‘closed’ one. For the ‘open’ (plate 2) dripper, the print profile on this object is slightly different than the ‘closed’ one. There's a bit more wall strength and infill. I recommend the ‘closed’ one (plate 1) if you're prefer a sturdy feeling dripper.

You can print either plate 1, or plate 2. And optional add plate 3 for the drip-tray

Use of material:

You can use ABS/ASA/PLA or PETG to your liking. PLA is easy, because no material really needs to go into the dishwasher, or will be in contact with anything you will drink from.

You can also buy me a coffee here: https://ko-fi.com/spacecorp