Xiaomi Mijia Automatic Soap Dispenser Refill Bottle Cap PETG Version

Some detractors claim this model lacks structural integrity, but the issue stems from poor filament adhesion in their prints, leading them to deliberately break it and falsely criticize the design.

In practical use, the model experiences no vertical stress; thus, even with subpar layer adhesion, it won't crack unless deliberately pulled or pressed.

Simply align the recesses and insert it into the bottle's opening.

This upload utilizes PETG filament, offering superior durability to PLA.

Instructions are straightforward:

1. Remove the soap bottle from the dispenser;

2. Employ a screwdriver, scissors, or similar tool to pry off and discard the original cap (damage is inconsequential);

3. Introduce approximately one-quarter of Blue Moon hand soap (the green aloe vera variant is ideal);

4. Fill the remainder of the bottle with purified water;

5. Insert the small tube from the original cap into the 3D-printed replacement, then shake well to blend;

6. Secure the new cap and remount the bottle to the dispenser.

Perfect! Compatible with all Xiaomi series soap dispensers!

Instructions for Use:

1. Remove the Soap Bottle: Detach the soap bottle from the dispenser.
2. Remove the Original Cap: Use a screwdriver, scissors, or similar tools to pry off and discard the original soap bottle cap (damage is inconsequential).
3. Add Liquid Soap: Pour approximately one-quarter of Blue Moon liquid soap (the green aloe vera scent is recommended) into the bottle.
4. Add Purified Water: Fill the bottle to capacity with purified water.
5. Assemble the New Cap: Insert the small tube from the original cap into the printed PETG cap, then shake the bottle thoroughly to ensure even mixing.
6. Reattach to the Dispenser: Secure the new cap onto the bottle and reinstall it into the soap dispenser.

Perfect Fit!

Compatible with all Xiaomi series soap dispensers!