daniel.c.fink

cover

Screenshot 2024-12-04 at 21.38.26.png

Screenshot 2024-12-04 at 21.38.16.png

IMG_3578.jpeg

plate_1.png

BoardEMT

4WS.jpg

A must print if you own a Spektrum DX5 Pro. I printed 6 wheels because well… you know, why not? You could break one, lose one or maybe your friend borrows it to try out and refuses to return it! Or you could just print each one in a different color to fit your mood that day :-) The print profile has the object color set to blue, but I printed them in Elegoo Orange PLA because it was the closest thing I had to Spektrum orange. I used an A1 mini printer, so I also changed the orientation to print face down to make the visible surface look cleaner. These print great. The only thing I noticed( and this may just be my printer), is that they fit a little loose. Not loose enough to fall off( I did shake my radio upside down), but I would prefer them a little more snug. I also wish they had a mark indicating center, or ‘0’ degrees but that could easily be added. If you boost my print profile, the tokens will automatically go to the original designer. Thank you for this great design!

0.16mm layer, 2 walls, 15% infill

Rear steer wheel for the Spektrum DX5 Pro. Replaces the stock knob. PLA (or a material with similar is recommended as this is designed to be a friction fit.

Spectrum DX5 Pro Rear Steer Wheel

ASIA

Print Profile(1)

Description

Comment & Rating (1)

License

Related Models