Skadis Dupont Hanger

Basic Dupont Hanger for Ikea skadis

Doesnt require supports 

I recommend atleast 30% of infill and basic PLA

UPDATE 27/11/2025

-I added new different sizes, the design is almost the same as the original small one

-Also, I added some custom models with the only difference that it has the word DUPONT below, i only recommend this models if your printer can print with a considerable resolution

-I modified the hook to make it fit a bit less tight to make it easier to change the hanger of place

**-For curious people, I have been testing a lot of printing profiles to test how many infill is the best for it to print, obviously the material is an important factor, im using recycled PLA, so normal PLA or ABS should work even better, so i find out than anything less than 25% of infill makes the little tweezers to snap easily, also, anything above 70% will make the tweezers sooo fragile ,for some reason ,that i couldnt try any hanger without breaking one of the tweezers when removing them from the heating bed. What about the best results?, even tho i recommend 30%, i found out that 45% is perfect for me and my printer, but testing it with other printers and materials, make it somehow worse than 30%, so yeah 30% of infill is still my recommendation.