Triceratops Night Lamp for kids

EN

A Triceratops model is available for download. The origin of the model is from the author Alsamen. With his kind permission, I can present this lamp to you.

The model itself is designed to fit on a 250x210 mm printing surface. Shell is 3 mm.

After printing, I recommend adding rubber feet, used as anti-slip pads for furniture (any arbitrary shape). If you don't have them available, you can of course print squares, cylinders, with a height of about 3-5 mm (also depending on the thickness of the cable, which will be under the model and will be directed backwards or sideways) and then stick them on the legs of the Triceratops model from below.

3MF files for download are for Bambulab printers (Bambu Studio), Anycubic Kobra 3 (Anycubic Slicer Next), or Orca Slicer. STL files are of course available.

The lamp lighting is optional, however, you have two options here. Either a light "puck" available at Bambu Store - LED Lamp Kit 001 (marked MH001), or the second option is to connect a 3LED USB key using a USB extension USB-A (male-female).
To connect the light, you will also need either a power source to an electrical outlet with a 5V USB output (up to 1A - approx. 0.6A) or a Power Bank. The MH001 kit is equipped with a switch, the second option does not include a switch, but it is of course not a problem to assign a switch there.
I also tried various other options, such as RGB LED strip, but due to the quantity on the market, I did not make a holder for this option.

Links to buy electronics:

MH001 - Bambu store

https://eu.store.bambulab.com/products/led-lamp-kit-001?modelId=770337

3LED USB lamp (variant 3LED) - Aliexpress

https://www.aliexpress.com/item/1005002557759804.html

USB extension cable (buy from your local supplier, I recommend the thinnest cable possible.


*********************************************************************************************

CZ

Ke stazeni je k dispozici model Triceratopse. Puvod modelu je od autora Alsamen. S jeho laskavym svolenim Vam mohu predstavit tuto lampu.

Samotny model je navrzen do velikosti aby se vlezl na tiskovou podlozku 250x210 mm. Skorapka modelu je 3mm silna.

Po vytisteni doporucuji doplnit gumove nozky, pouzivajici se jako protiskluzove podlozky na nabytek (jakykoliv libovolny tvar). V pripade ze nemate k dispozici, muzete samozrejme vytisknout ctverecky, valecky, o vysce cca 3-5 mm (taky podle tloustky kabelu, ktery bude pod modelem a bude smerovat smerem dozadu nebo z boku) a ty pote nalepit na nozky modelu Triceratopse zespodu.

3MF soubory ke stazeni jsou pro Bambulab tiskarny (Bambu Studio), Anycubic Kobra 3 (Anycubic Slicer Next), pripadne Orca Slicer. K dispozici jsou samozrejme STL soubory.

Osvetleni lampy je libovolne, nicmene zde mate k dispozici dve moznosti. A to bud svetelny “puk” dostupny na Bambu Store - LED Lamp Kit 001 (oznaceni MH001), pripadne druha moznost k dispozici je pripojeni 3LED USB klice pomoci USB prodlouzeni USB-A (samec-samice).
K zapojeni svetla bude potreba take bud zdroj do elektricke zasuvky s vystupem na 5V USB (do 1A - approx. 0,6A) nebo pomoci Power Banky. Kit MH001 je vybaven vypinacem, druha moznost s vypinacem nepocita, ale neni problem tam samozrejme pripadne vypinac pridelat.
Zkousel jsem i ruzne jine moznosti, jako treba RGB LED pasek, ale vzhledem k mnoszstvi na trhu, nedelal jsem pro tuto moznost zadny drzak.

Odkazy k nakupu elektroniky:

MH001 - Bambu Store

https://eu.store.bambulab.com/products/led-lamp-kit-001?modelId=770337

3LED USB lamp (varianta 3LED) - Aliexpress

https://www.aliexpress.com/item/1005002557759804.html

HADEX (CZ)

https://www.hadex.cz/t631-usb-lampicka-3x-led-bila/

a
USB prodluzovaci kabel (nakoupite u Vaseho dodavatele v okoli nejspise, doporucuji co nejtenci mozny kabel.