Sandevistan

Sandevistan Mod from cyberpunk edge runners/ 2077

Using an LED light strip to connect the parts and light them up, the battery and controller are housed in the top 3 parts of the model

**TO NOTE:

this was modelled for me, I'm 6'3, so you can adjust the length by removing/adding a “midsection” to the print

MATERIALS:

Portable battery - dimensions 69mm wide x 106mm long x 16.4mm high, here's the battery i used in my project

https://veektomx.com/products/mini-power-bank-10000mah-veektomx-22-5w-fast-charging-small-portable-charger-with-pd-3-0-qc-3-0-usb-c-slim-compact-battery-bank-dual-output-competible-with-iphone-samsung-travel-must-haves

Primer spray paint and gunmetal / metallic black 

LED controller: I used the dig2go box with inbuilt wifi to control mine, https://quinled.info/quinled-dig2go/

LED strip: dig2go strip came with the controller, and needs 27 LEDs - dimensions: 41mm wide, 57mm high and 17mm tall

GUIDE: 

• After printing + removal of supports sand down the rougher surfaces
• Spray paint (optional) with primer and then metallic black/gunmetal
• Solder wires to the controlling board and use a cable to connect the battery to the controller + test the LEDs to make sure they work
• Hot glue the mid sections in place to the bottom of the LED light strip and hot glue the controller box to its part 
• (Optional) tape off LEDs in between to make it look more like the game/anime prop 
• Combine all pieces and program some patterns using WLED or your choice of controlling software

Enjoy

Please feel free to comment any issues/help for this