Lego Duplo customizable train tracks
Remixed by
Copyright Claim
Lego Duplo customizable train tracks
Remixed by
Boost
46
123
47
Print Profile(17)
straight - 0.2mm layer, 4 walls, 15% infill
Designer
58 min
1 plate
curved 30° - 0.2mm layer, 4 walls, 15% infill
Designer
59 min
1 plate
small extended ramp - 0.2mm layer, 4 walls, 15% infill
Designer
1.8 h
1 plate
curved 15° - 0.2mm layer, 4 walls, 15% infill
Designer
35 min
1 plate
Click to see more
Boost
46
123
47
1
204
404
Released
Description
You may need to add normal supports depending on the filament you use and your settings. This could help achieve a smoother bottom side.
Description from original author:
Summary
This is improved version of Customizable train tracks
- It is customizer now! You don't need to use OpenSCAD to generate tracks!
- But, if you want you can open the single file lego_duplo.scad in OpenSCAD, you don't need to download any libraries
- You can generate bricks, plates, tracks and calibration parts
- Tracks were improved to print without any supports - improved knobs and long bridges (set geo use offset to No)
- Fixed some code issues, which produced non-manifold stl
Version 2
- Set default knob and stud diameter to 9.4 (KnobD and StudD)
- Set default wall thickness to 1.5 (BrickWallT)
- Added small chamfer on the top of knobs
- Updated calibration parts: dynamic size (depends on GenerateKnobsX and GenerateKnobsY), second track end
- Got rid of TrackRadius, use Track Length for straight and curved tracks (in studs)
- Updated curved rails to Type 3, so length of 4 curved rails (30deg) is equal to 4 straight rails (see more here: Lego Duplo Rail Dimensions article 4.2)
Version 3
- Added Track Width and Track Wheel Width (distance betweens wheels) parameters
Comment & Rating (47)
All
Print Profile
curved 15° - 0.2mm layer, 4 walls, 15% infill
hat sich sehr gut drucken lassen.
0
Reply
Print Profile
small extended ramp - 0.2mm layer, 4 walls, 15% infill
Worked well (blue one in photo)
0
Reply
Print Profile
curved 15° - 0.2mm layer, 4 walls, 15% infill
0
Reply
Print Profile
straight - 0.2mm layer, 4 walls, 15% infill
0
Reply
Print Profile
curved 45° - 0.2mm layer, 4 walls, 15% infill
0
Reply
Print Profile
curved 30° - 0.2mm layer, 4 walls, 15% infill
The rails themselves work well, however the guides are thicker than original leading to the issue that Duplo action bricks cannot be placed in them.
The designer has replied
0
Reply
that's something I just noticed as well, I plan on fixing it as soon as I have some time
(Edited)1
Reply
Replying to @tsubus
that would be awesome!
I am just working on printable action bricks for the DUPLO trains, just uploaded the first one today, have a look :)
(Edited)2
Reply
Replying to @tsubus
I would like to have the modified version too. But I like the Print.
0
Reply
Print Profile
big ramp - 0.2mm layer, 4 walls, 15% infill
It doesn't work, the hill is too steep and the train is stuck
1
Reply
Prints well, but sadly "big ramp" is ways too step for the motorized duplo trains of current generation.
1
Reply
Print Profile
medium extended ramp - 0.2mm layer, 4 walls, 15% infill
Great look
0
Reply
Print Profile
small extended ramp - 0.2mm layer, 4 walls, 15% infill
Nice compatibility with the original ones
0
Reply
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (1)
Related Models
© 2024 MakerWorld