Tibalt's Trickery MtG Art - Hueforge

My first upload! 

Original MtG art by Anna Podedworna

Hueforge Art from the magic the gathering card, Tibalt's Trickery.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x150.15mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA Overture Black Transmission Distance: 0.7
    PLA Overture Red Transmission Distance: 4.6
    PLA Overture Yellow Transmission Distance: 9.7
    PLA Overture White Transmission Distance: 4.4
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Red
    At layer #16 (1.36mm) swap to Yellow
    At layer #23 (1.92mm) swap to White

Border Only Colors from here until the end.
    At layer #28 (2.32mm) swap to Red for the rest.