Ember Mug Lid - Free 3D Print Model

Search models, users, collections, and posts

WeaveTogether

Household>Other House Models

IP Report

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

1.3 h

1 plate

4.7(10)

Smaller lid for not fitting devices (like Smart Mug 2)

1.2 h

1 plate

Open in Bambu Studio

Boost

168

118

Released

Description

This is a simple lid for an Ember electric mug. It loses a lot of heat through the top, so this will extend battery life significantly between sips! Simple press fit the knob, or add a dot of glue if desired. Recommend printing in PETG (not PLA) for higher temp tolerance. Not dishwasher safe!

Comment & Rating (13)

@CybDis

Model does not fit the Smart Mug 2, 295 ml (10 oz) had to shrink it by 93% to fit.

The designer has replied

@MamaBearEllen

Good to know! Feel free to upload your file as a print profile for folks who have that mug.

@Antbak

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Very useful when drinking outsie

The profile uploader has replied

@MamaBearEllen

thanks for the boost!

@hdufour

Print Profile

0.2mm layer, 2 walls, 15% infill

Perfect print for storing my cup @ my desk without the dust falling into it! thanks!

@Cosmyn_3D

Print Profile

0.2mm layer, 2 walls, 15% infill

Thx.

@haykondriyak

Print Profile

0.2mm layer, 2 walls, 15% infill

@yvettehend143

Print Profile

0.2mm layer, 2 walls, 15% infill

@gohan89

Print Profile

0.2mm layer, 2 walls, 15% infill

Other Issues:the handle should be tightened a little more because it slips. could you widen the internal recess/channel where the mug rim sits? This would allow it to fit a broader range of smaller mugs.