Nocks Depot Holder Push N Pull Tool - Free 3D Print Model

Search models, users, collections, and posts

Igor.Klimov

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 100% infill

Designer

1.2 h

3 plates

4.7(37)

Open in Bambu Studio

Boost

175

498

500

279

Released

Description

This 3D model is designed to store your arrow pins, keeping them always within reach. The keychain is convenient to hang on your quiver and use when needed. The set includes versions for Easton G nocks and for Beiter size 1 and size 2 or H.

Comment & Rating (49)

@SteRex

tried with beiter 1s, they do sort of fit but so tightly the whole holder curves back 😅

The designer has replied

@Igor.Klimov

I’m aware of this issue occurring with certain settings. First of all, let the plastic cool down for a while. If that doesn’t help, it’s most likely that your flow ratio is not set correctly. There are excellent calibration models for this parameter available in MakerWorld.

@SteRex

Replying to @Igor.Klimov :

I'll try calibration, this was one of the first items I printed on my a1 and others after it seem fine but tolerances may be less important on them. items were fully cooled before trying the fitment

@BaschDE

Boosted

Print Profile

0.2mm layer, 2 walls, 100% infill

Very beautiful, swift print The Beiter Asy #1 fit very well

Show original

@1001kilometer

Boosted

Print Profile

0.2mm layer, 2 walls, 100% infill

Printed in PETG. The Beiters fit perfectly. Thank you

Show original

@stevenboiro

Print Profile

0.2mm layer, 2 walls, 100% infill

I printed one of each in PETG to determine with my club colleagues which was best suited for everyone, they are excellent

Show original

@BaschDE

Boosted

Thank you for your work I appreciate it significantly more than the original

Show original

@user_1701472840

Will this also work for the g-nock Large?

The designer has replied

@Igor.Klimov

As far as I know, Easton has only one g-nock size.

@mediweevil

tried these for H nocks and they don't fit, sorry. H pin nocks don't have an OD taper towards the pin hole, they are close to parallel. the nockbed end fits nicely but the open side needs to be reworked.

The designer has replied

@Igor.Klimov

Try to calibrate the flow in your printer because the model is made specifically for H pin

@user_3719243666

Boosted

great work

@user_1454857500

Print Profile

0.2mm layer, 2 walls, 100% infill

Unfortunately they do not fit my cams, but the print works great

Show original

@BlueHavoc

Print Profile

0.2mm layer, 2 walls, 100% infill

Fit my Beiter Hunters perfectly!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.