Minus97

cover

344897517_170811259255636_2924878867869731898_n.jpg

344873903_620573806626568_952299013618037349_n.jpg

344902704_624359279539401_5468085913101918130_n.jpg

345184149_1370305293749208_1138865818234429044_n.jpg

343659195_9285731564802629_4273846289637273407_n.jpg

344902654_1291742455028919_3171760921281758503_n.jpg

plate_1.png

plate_2.png

0.12mm layer, 4 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

With macro photography you always have the problem that there is not enough light. So I thought about how I could attach my RGB light from Ulanzi to the front of the lens. This holder came out.
I glued foam rubber inside to protect the lens hood from scratches. There are several lights that are identical to the Ulanzi and fit accordingly. I have uploaded a version with 83mm and one with 93mm inner diameter. This is the standard diameter of most lens hoods. As a precaution, measure before printing and write to me if you need a different size. Otherwise you just need an M4 nut and screw.&nbsp;Bei der Makrofotografie hat man immer das Problem, dass zu wenig Licht vorhanden ist. Also hab ich mir überlegt wie ich meine rgb Leuchte von Ulanzi vorne am Objektiv befestigen könnte. Rausgekommen ist dieser Halter. Innen hab ich Moosgummi eingeklebt um die Gegenlichtblende vor Kratzern zu schützen. Es gibt mehrere Leuchten die baugleich mit dem Ulanzi sind und entsprechend auch passen. Ich habe eine Version mit 83mm und eine mit 93mm innerem Durchmesser hochgeladen. Das ist der Standarddurchmesser der meisten Gegenlichtblenden. Messt vorsichtshalber vor dem Drucken mal nach und schreibt mir, wenn ihr eine andere Größe braucht. Ansonsten braucht ihr bloß noch eine M4 Mutter und Schraube.

Macro photography often presents insufficient lighting challenges. To address this, I devised a method to attach my Ulanzi RGB light to the lens. The result is this holder.
Foam rubber lining protects the lens hood from scratches. Several lights, identical to the Ulanzi model, are compatible. I've included versions with 83mm and 93mm inner diameters—standard sizes for most lens hoods. However, it is advisable to measure before printing and contact me if a different size is required. Otherwise, only an M4 nut and screw are needed.&nbsp;

Macro Lens Light Clamp (Ulanzi)

ASIA

Print Profile(1)

Description

Comment & Rating (8)

License

Related Models